0 Members and 1 Guest are viewing this topic.
That was interesting...Are sure you have installed Openmediavault onto /dev/sdb as you said before?
See my last posting for copy/paste.If they somehow combined PuTTY with SSL .. would it be called SLuTTY ?
Quote from: SeZo on March 07, 2013, 10:40:50 pmThat was interesting...Are sure you have installed Openmediavault onto /dev/sdb as you said before?I only had one drive connected up when I installed OMV which was the 10gb drive, I used the smallest drive I had available because as far as I understand the operating system uses the entire drive, the boot drive can't be partitioned, but knowing me I could have got things mixed up Graeme
That is OK then It looks like the /sda1 & 5 are mounted by fstab (in a very complex way)You might have trouble untangling them
How I see it is you installed with a single disk .. added another disk (which became sda) .. then you set the second HDD as the primary boot device in the BIOS ?
OK, ignore that last question .. just checked the model numbers .. the 10GB is IDE, the 80GB is SATA .. the BIOS is obviously set to boot SATA first.
failed (code8)File system check failed. A log is being saved in /var/log/fsck/checkfs if that location is writable. Please repair the file system manually. ...failed!A maintenance shell will now bw started . CONTROL-D will terminate this shell and resume system boot. ...(warning).give root password for maintence (or type CONTROL-D to continue): flashing cursor
For the sake of sanity .. change the jumpers on those 2 drives .. so -10GB = Master80GB = Slave
And have them both connected at installation.
BTW, there's probably no need to format and start again.
Page created in 0.723 seconds on mtweb1 with 29 queries.