0 Members and 1 Guest are viewing this topic.
device `hpaio:/usb/ScanMagic_1200_UB_Plus_Scanner?serial=CN0CQ3B1DH05HX' is a ScanMagic_1200_UB_Plus_Scanner
Ever considered adding a REALLY strict static password to Teamviewer, then setting it to autostart at bootup
then setting it to autostart at bootup
No scanners were identified. If you were expecting something different,check that the scanner is plugged in, turned on and detected by thesane-find-scanner tool (if appropriate). Please read the documentationwhich came with this software (README, FAQ, manpages).
I've just rebooted, do you want the output from groups before we try and see if saned can see the scanner ?
graeme@Linux3 ~ $ groupsgraeme adm lp cdrom sudo dip plugdev lpadmin sambashare scanner sanedgraeme@Linux3 ~ $ sudo -s[sudo] password for graeme: Linux3 ~ # su -s /bin/bash sanedsaned@Linux3 /home/graeme $ scanimage -Ldevice `gt68xx:libusb:003:002' is a Mustek BearPaw 1200 CU flatbed scannerdevice `net:127.0.0.1:gt68xx:libusb:003:002' is a Mustek BearPaw 1200 CU flatbed scannerdevice `net:localhost:gt68xx:libusb:003:002' is a Mustek BearPaw 1200 CU flatbed scannersaned@Linux3 /home/graeme $
sudo service saned status
graeme@Linux3 ~ $ sudo service saned status[sudo] password for graeme: saned is running.graeme@Linux3 ~ $
What happens now if you start xsane on the SERVER ? .. does it offer you 3 scanners to choose from ?
# saned.conf# Configuration for the saned daemon## Daemon options# Port range for the data connection. Choose a range inside [1024 - 65535].# Avoid specifying too large a range, for performance reasons.## ONLY use this if your saned server is sitting behind a firewall. If your# firewall is a Linux machine, we strongly recommend using the# Netfilter nf_conntrack_sane connection tracking module instead.# data_portrange = 10000 - 10100## Access list192.168.2.0/24# A list of host names, IP addresses or IP subnets (CIDR notation) that# are permitted to use local SANE devices. IPv6 addresses must be enclosed# in brackets, and should always be specified in their compressed form.## The hostname matching is not case-sensitive.#scan-client.somedomain.firm#192.168.0.1#192.168.0.1/29#[2001:7a8:185e::42:12]#[2001:7a8:185e::42:12]/64192.168.255.0/24# NOTE: /etc/inetd.conf (or /etc/xinetd.conf) and# /etc/services must also be properly configured to start# the saned daemon as documented in saned(8), services(4)# and inetd.conf(4) (or xinetd.conf(5)).
# This is the net backend config file.## net backend options# Timeout for the initial connection to saned. This will prevent the backend# from blocking for several minutes trying to connect to an unresponsive# saned host (network outage, host down, ...). Value in seconds.# connect_timeout = 60## saned hostslocalhost 127.0.0.1# Each line names a host to attach to.# If you list "localhost" then your backends can be accessed either# directly or through the net backend. Going through the net backend# may be necessary to access devices that need special privileges.# localhost
Page created in 0.085 seconds on mtweb1 with 28 queries.