Show Posts

You can view here all posts made by this member. Note that you can only see posts made in areas to which you currently have access.


Messages - nvs

Pages: [1]
1
It reports that the network is unreachable. When I added mtnl name server ip address in ipv4 setting and
left DHCP automatic it gave the same result.

2
Sorry for the delay. I was visiting my sister in Mumbai. Now I am back to U.S. I hope my registration will be forever.
I will ask my niece-in-law who is unfamiliar with linux but well-versed in windows to make changes to configuration
that you will recommend.

After I set the router to default configuration I got connected to the router but not to the internet. Here is what I got.
[email protected] ~ $ sudo cat /etc/NetworkManager/system-connections/*b*
[sudo] password for ravi:
[connection]
id=Auto belkin.06C
uuid=8ca4e7bd-088c-4c51-8aac-4add9bbe5a2e
type=802-11-wireless

[802-11-wireless]
ssid=belkin.06C
mode=infrastructure
security=802-11-wireless-security

[802-11-wireless-security]
key-mgmt=wpa-psk
auth-alg=open
psk=********

[ipv4]
method=auto

[ipv6]
method=auto


[email protected] ~ $ ping -c5 192.168.2.1
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.
64 bytes from 192.168.2.1: icmp_seq=1 ttl=30 time=1.56 ms
64 bytes from 192.168.2.1: icmp_seq=2 ttl=30 time=1.37 ms
64 bytes from 192.168.2.1: icmp_seq=3 ttl=30 time=1.41 ms
64 bytes from 192.168.2.1: icmp_seq=4 ttl=30 time=1.53 ms
64 bytes from 192.168.2.1: icmp_seq=5 ttl=30 time=1.50 ms

--- 192.168.2.1 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4006ms
rtt min/avg/max/mdev = 1.376/1.478/1.567/0.080 ms

Networking screen for belkin.06C shows

belkin.06C
Connected
Hardware Assress 12:34:56:00:09:43
Security WPA, WPA2
Strength Excellent
Link Speed 54 Mb/s
IP Address 192.168.2.2
Default Route 192.168.2.1
DNS 192.168.2.1

DNS address above is that of the router. The network connection has no routing information added.

3
No, I cannot even ping 192.168.2.1 the IP address of my Belkin router with the connection wifi1, a hidden network, listed below.
I probably need to do something in ipv4 setting but don't know what. It has only one entry method "Automatic DHCP"

earth system-connections # cat wifi1
[connection]
id=wifi1
uuid=d2033f03-1280-4b44-83b4-0428249ca6ac
type=802-11-wireless

[802-11-wireless]
ssid=SKS
mode=infrastructure
bssid=EC:1A:59:90:40:6C
mac-address=12:34:56:00:09:43
security=802-11-wireless-security

[802-11-wireless-security]
key-mgmt=wpa-psk
psk=*********

[ipv4]
method=auto

[ipv6]
method=auto




4
Yes, I have set router to not broadcast SSID and I have also entered LEO NANO
ethernet address in wireless access control list and in the WLAN section of the LAN
interface.

After reading your comment I changed the Belkin router configuration to default
configuration and that created a wireless connection “Auto belkin.06C” listed below.

earth system-connections # cat Auto\ belkin.06C
[connection]
id=Auto belkin.06C
uuid=2bd95e60-74ca-4850-9bc7-37af1dc76fe1
type=802-11-wireless

[802-11-wireless]
ssid=belkin.06C
mode=infrastructure
security=802-11-wireless-security

[802-11-wireless-security]
key-mgmt=wpa-psk
auth-alg=open
psk=********

[ipv4]
method=auto

[ipv6]
method=auto

This connection is established but I cannot connect to the internet.

5
After I deleted WiFi1 only Ethernet connection 1 is left as shown below.

[email protected] /etc/NetworkManager/system-connections $ ls
Ethernet connection 1

[email protected] ~ $ sudo modprobe -r mt7601Usta
[sudo] password for ravi:
[email protected] ~ $ sudo modprobe mt7601Usta
[email protected] ~ $

After that I created WiFi1 as indicated here

[email protected] ~ $ sudo cat /etc/NetworkManager/system-connections/WiFi1
[sudo] password for ravi:
[connection]
id=WiFi1
uuid=70f89d0d-4558-4133-b5a4-a8e8fa12105e
type=802-11-wireless

[802-11-wireless]
ssid=SKS
mode=adhoc
bssid=EC:1A:59:90:40:6C
mac-address=12:34:56:00:09:43
security=802-11-wireless-security

[802-11-wireless-security]
key-mgmt=wpa-psk
proto=rsn;
pairwise=ccmp;
group=ccmp;
psk=wh0ami?!

[ipv4]
method=auto

[ipv6]
method=auto

When I disconnected the wired Ethernet connection and I tried to switch on wireless connection
the connection name HOME appeared. Trying to turn that on repeatedly kept asking for password
authentication but never established connection. I deleted that connection. Rebooted the system.
Created a new connection with mode Ad-hoc.
[email protected] ~ $ sudo cat /etc/NetworkManager/system-connections/WiFi1
[sudo] password for ravi:
[connection]
id=WiFi1
uuid=70f89d0d-4558-4133-b5a4-a8e8fa12105e
type=802-11-wireless

[802-11-wireless]
ssid=SKS
mode=adhoc
bssid=EC:1A:59:90:40:6C
mac-address=12:34:56:00:09:43
security=802-11-wireless-security

[802-11-wireless-security]
key-mgmt=wpa-psk
proto=rsn;
pairwise=ccmp;
group=ccmp;
psk=********

[ipv4]
method=auto

[ipv6]
method=auto

Now clicking on the network icon at bottom right, disonnecting wired connection and clicking on
wireless shows unavailable and automatically creates a connection “Auto HOME” and goes into
authentication loop endlessly generating additional “Auto HOME” connections.

I am frustrated and ready to give up.  Anyway, it is 11:30 and I feel sleepy. Will resume tomorrow.

6
[email protected] ~ $ lsmod
Module                  Size  Used by
cfg80211              401436  0
bnep                   18893  2
rfcomm                 53664  0
bluetooth             323534  10 bnep,rfcomm
binfmt_misc            13140  1
coretemp               13195  0
gpio_ich               13229  0
ppdev                  17391  0
mt7601Usta            744038  0
snd_hda_codec_realtek    45473  1
snd_hda_intel          42658  3
snd_hda_codec         164003  2 snd_hda_codec_realtek,snd_hda_intel
microcode              18830  0
snd_hwdep              13272  1 snd_hda_codec
snd_pcm                89488  2 snd_hda_codec,snd_hda_intel
dm_multipath           22402  0
scsi_dh                14458  1 dm_multipath
snd_page_alloc         14230  2 snd_pcm,snd_hda_intel
snd_seq_midi           13132  0
snd_seq_midi_event     14475  1 snd_seq_midi
snd_rawmidi            25094  1 snd_seq_midi
lpc_ich                16864  0
snd_seq                55383  2 snd_seq_midi_event,snd_seq_midi
serio_raw              13189  0
snd_seq_device         14137  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              24447  2 snd_pcm,snd_seq
parport_pc             31981  1
snd                    60790  16 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
mac_hid                13037  0
soundcore              12600  1 snd
lp                     13299  0
parport                40795  3 lp,ppdev,parport_pc
hid_generic            12492  0
usbhid                 47361  0
hid                    87192  2 hid_generic,usbhid
dm_mirror              21715  0
dm_region_hash         15984  1 dm_mirror
dm_log                 18072  2 dm_region_hash,dm_mirror
i915                  589697  3
video                  18777  1 i915
i2c_algo_bit           13197  1 i915
drm_kms_helper         46867  1 i915
drm                   242354  4 i915,drm_kms_helper
r8169                  61434  0
mii                    13654  1 r8169
[email protected] ~ $ rfkill list
[email protected] ~ $

7
[email protected] ~ $ sudo lshw -C network
  *-network               
       description: Ethernet interface
       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: [email protected]:02:00.0
       logical name: eth0
       version: 02
       serial: 00:20:ed:ff:ff:ff
       size: 100Mbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.2.2 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
       resources: irq:42 ioport:d000(size=256) memory:e1110000-e1110fff memory:e1100000-e110ffff memory:e1120000-e112ffff
  *-network DISABLED
       description: Wireless interface
       physical id: 1
       logical name: ra0
       serial: 12:34:56:00:09:43
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=RALINK WLAN multicast=yes wireless=Ralink STA

[email protected] ~ $ lsusb
Bus 001 Device 002: ID 148f:7601 Ralink Technology, Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 045e:00cb Microsoft Corp. Basic Optical Mouse v2.0
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

[email protected] ~ $ sudo lsmod | grep 7601
mt7601Usta            744038  0



8
I tried to set up a wireless network connection from menu->preferences->network connections and entered connection name, SSID of my Belkin router,
mode infrastructure, router mac address for BSSID, and USB mac address for device mac address. In the router I added usb mac address in wireless access
control list and in wlan section of lan interface. With that set up I tried to connect to internet after disconnecting the wired connection. I could not connect to internet.

What am I doing wrong?
 inxi -n
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: 00:20:ed:ff:ff:ff
           Card-2: Ralink driver: rt2870
           IF: ra0 state: down mac: 12:34:56:00:09:43

After executing ifup -a,
 inxi -n
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: 00:20:ed:ff:ff:ff
           Card-2: Ralink driver: rt2870
           IF: ra0 state: down mac: 12:34:56:00:09:43
ra0 state remains down.

9
Mark,

You are great. It worked and survived reboot.

Thank you very much.

nvs

10
Cannot connect to internet leoxsys LEO NANO 150N wireless usb adapter even after
going through all the steps of topic 11154 on my linux mint 16 (petra) desktop.
The vendor ID 148f is MediaTek and 7601 is productID. Is there a linux driver for 7601
that can be compiled and integrated in the system?
The relevant outputs are listed below.

[email protected] ~ $ inxi -n
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: 00:20:ed:ff:ff:ff
           Card-2: Ralink
           IF: N/A state: N/A speed: N/A duplex: N/A mac: N/A

[email protected] ~ $ uname -a
Linux mint 3.11.0-12-generic #19-Ubuntu SMP Wed Oct 9 16:12:00 UTC 2013 i686 i686 i686 GNU/Linux

[email protected] ~ $ lsusb
Bus 001 Device 003: ID 148f:7601 Ralink Technology, Corp.

[email protected] ~ $ sudo lshw -C network
  *-network               
       description: Ethernet interface
       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: [email protected]:02:00.0
       logical name: eth0
       version: 02
       serial: 00:20:ed:ff:ff:ff
       size: 100Mbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.2.2 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
       resources: irq:42 ioport:d000(size=256) memory:e1110000-e1110fff memory:e1100000-e110ffff memory:e1120000-e112ffff

Pages: [1]

SimplePortal 2.3.3 © 2008-2010, SimplePortal