Show Posts

You can view here all posts made by this member. Note that you can only see posts made in areas to which you currently have access.


Messages - pauly66

Pages: [1] 2
1
General Help & Advice / Re: Spotify
« on: August 12, 2019, 08:39:44 pm »
Thank you Mark and wishbone installed libcurl and retried installing using the 2nd link in wishbones post and voila installed all ok so once again Thank you both for your help i didn't realise libcurl was needed or how to get it

2
General Help & Advice / Spotify
« on: August 10, 2019, 11:56:31 am »
Hi Guys
Having a few difficulties trying to install spotify on my linux 19.1 . I have followed all types of tutorials but it just wont install, even tried the spotify app that is in software package and that hung . installing manually I get to the end where I use the command of get upadates then I get the message :

Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies.
 spotify-client : Depends: libcurl3 but it is not going to be installed
E: Unable to correct problems, you have held broken packages.
Not being too savvy I am at a loss at what this means can someone point me in the right direction please
cheers
Paul

3
Hardware Compatibility / Re: I'm a Broken man!
« on: February 02, 2019, 12:51:17 pm »
Thanks Mark
There was another twist to the story, When I put everything back in the case the graphics went back to unrecognisable graphics so I pondered why and realised I was now connecting though a kvm switch so more investigation ensued only to discover that I had a dodgy cable (which didnt seem to affect windows ) strange but at least I got to the bottom of it swapped the cables and success  all round.
Cheers

4
Hardware Compatibility / Re: I'm a Broken man!
« on: January 31, 2019, 12:46:27 pm »
thanks, it really does feel satisfying in the end lol.  So......... you have mint 19 on your system now there's a thought ...........perhaps another time lol

5
Hardware Compatibility / Re: I'm a Broken man!
« on: January 31, 2019, 10:27:49 am »
Good morning Mark
I am back ! After my demise the other day I decided that I would not be beaten by a machine so I went back to basics and breadboarded the whole system. (in fact it still is running outside
the case) booted up mint from dvd and I could see  straight away that the the display was ok so I went to install it . I got half way through then it came up with an error about the
the disc being dirty or the hard drive couldn’t be written to . I knew the disc was ok so tried again, same result time to change to a newer hard drive, the one I was using was a ide, now gone to a sata drive VOILÀ mint installed in around 20 minutes and the screen resolution was bang on . I ran the dmesg command you asked me to do the other day and it showed that I had a radeon card etc so everything was fine. HOWEVER I did have a small problem in as much when I try to update I get the message of  dpkg was interrupted and you must run it manually but when I tried it said I need to be a super user to do this!  Anyway  found out about superuser and logged in as that and a WHOLE lot of information passed my eyes lol. Updating this, installing that etc now its downloading the packages for updates  and I have just got the message to say my system is up to date. Finally I can now say mint is installed and running nicely on my old board and I am a super user (only kidding)
Ok thanks again for your help the other day at least now I know I am in good hands if I have any problems in the future
Cheers
Paul

6
Hardware Compatibility / Re: I'm a Broken man!
« on: January 29, 2019, 03:38:13 pm »
Hi Mark
The BAD news is I cant send you an output because I no longer have an operating system! I was trying all manner of things and then suddenly it stopped i. it wont boot any more so I
have loaded the cd rom again to reinstall it however its just as bad running from that so its no point going any further at this moment in time. Not only was the display rubbish but like i
said 5-12 seconds after clicking on an icon for anything to happen it is useless. I even think it could be the hard drive, the motherboard etc but then again windows 7 runs fine so I will
leave alone now . Thank you for all your efforts and although I am like a dog with a bone usually and wont stop trying this has gone too far lol. I accept defeat gracefully. If I ever get it sorted
I will let you know in the meantime take a big breath or a sigh of relief knowing that unlike Arnie........I wont be back!
many thanks
Paul

7
Hardware Compatibility / Re: I'm a Broken man!
« on: January 28, 2019, 11:12:17 pm »
Hi
WELL, that was a near miss lol. I saw a reply and proceeded to follow the instructions and got myself in a right old mess not realising that it was a different person answering ! I was
just about to reply with I cant do that and saw Mark's post to try a different first line which worked fine as no I dont know nano at all and got myself in all sorts of bother lol. Anyway the upshot
is it hasnt helped much the boot time to getting the desktop icons to appear is 1 minute 36 seconds which is a little better but i have a black screen for quite a while before anything happens. then every time I open a window I cant see anything else as its too big and I have to try resize it thats after I have waited for it to go into action , The whole thing is a nightmare
the display wont let me change anything it comes up with unknown display and I am stuck at 1024x768(4.3) the only other option is 800x600(4.3) and anything I do is SO slow and laboured which is why I am replying using my laptop lol.I think I will have to admit defeat and just use the windows as that has no issues at all using the same graphics card and just use linux in the laptop which is getting on for 8 years or more old.
Cheers

8
Hardware Compatibility / Re: I'm a Broken man!
« on: January 28, 2019, 05:40:32 pm »
ok , the first code gives the following readout:
RESUME=UUID=3a5c151f-9562-4555-9f40-5a2e7ca6c0d8
the second code gives:
cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=e055fb36-989f-4b8e-b332-94fd733d1422 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=3a5c151f-9562-4555-9f40-5a2e7ca6c0d8 none            swap    sw              0       0
/dev/fd0        /media/floppy0  auto    rw,user,noauto,exec,utf8 0       0
And the third one gives:
sudo blkid
[sudo] password for pauly:
/dev/sda1: UUID="e055fb36-989f-4b8e-b332-94fd733d1422" TYPE="ext4" PARTUUID="f9493a72-01"
/dev/sda5: UUID="3a5c151f-9562-4555-9f40-5a2e7ca6c0d8" TYPE="swap" PARTUUID="f9493a72-05"
/dev/sdb1: UUID="0C94C6BE94C6A992" TYPE="ntfs"
Yes it is a desktop pc but I have NO floppy disk /cable attached to the mother board the floppy socket is bare but I do see what you mean if I am correct the last line
of the previous readout dev/fdo mentions floppy but thats all I can say
Cheers

9
Hardware Compatibility / Re: I'm a Broken man!
« on: January 28, 2019, 01:01:56 pm »
Hi Mark
Floppy disk ? no have not even got a skeleton of one lol. Very strange. I do have a confession to make though, I said I haven’t a winfast card alas i have ! just forgot about it . I wholeheartedly agree about the startup being slow as well approx up to 3 minutes to get up and running.

10
Hardware Compatibility / Re: I'm a Broken man!
« on: January 28, 2019, 11:06:28 am »
Good Morning Mark
Thank you for reply and sorry for not getting back to you earlier but had a few problems carrying out the said instructions purely down to myself! anyway I think
i have finally succeeded  :)  so here goes. The 3 files you wanted are in the attachment broken1 and the final one is shown below
pauly@pauly-desktop ~ $ df -h
Filesystem      Size  Used Avail Use% Mounted on
udev            728M     0  728M   0% /dev
tmpfs           151M  5.0M  146M   4% /run
/dev/sda1       228G  6.9G  210G   4% /
tmpfs           753M  752K  752M   1% /dev/shm
tmpfs           5.0M  4.0K  5.0M   1% /run/lock
tmpfs           753M     0  753M   0% /sys/fs/cgroup
cgmfs           100K     0  100K   0% /run/cgmanager/fs
tmpfs           151M   40K  151M   1% /run/user/1000
/dev/sdb1       3.8G  3.1G  699M  82% /media/pauly/0C94C6BE94C6A9
I HOPE I have done everything correctly it took me a while to get my head around the commands! One thing I had a problem with is the dmesg  one it just stayed
In the terminal window however scrolling through it to try again I noticed that it said I have a "winfast card/ xp " but I haven't not sure whether that is anything to do with
my problems or its just a standard output not knowing what I was looking at ! I do have a soundblaster card installed and the graphics card is ati radeon RV350(9600 series
128mb , I know its old hat but I dont play games and it plays dvd files ok in windows .The motherboard is a Foxconn 661FX7mj. Like I say I know its not cutting edge hardware
but it will suffice my needs. AS I mentioned before my laptop runs 18.3 fine and it has a radeon card in that and the processor is only 2.0ghz where the copmuter is a 2.6ghz
and 1.5gb memory. Anyway I will leave it in your capable hands
Cheers for now
Paul

http://s000.tinyupload.com/?file_id=37294747414861632461
http://s000.tinyupload.com/?file_id=24584286596927527678
http://s000.tinyupload.com/?file_id=02806791139085824519

11
Hardware Compatibility / I'm a Broken man!
« on: January 27, 2019, 02:21:57 pm »
Hi
Ok first things first, I have linux 18.3 running on my laptop along with windows vista trying to use linux more and more although I still find it not as friendly as windows when adding or changing anything which brings me my present problem. I have a desktop with windows 7 on and decided to install 18.3 on it I admit its an old desktop and board but it does have a intel processor @2.66 gz so I figured it would be ok as windows works fine I have 1.5gb memory also. The problem is it takes FOREVER to start and when it finaly gets going its unusable ie
SO slow i click on an icon and wait, and wait etc its just a total pain i feel like giving up and staying with w7. BUT I have now spent 3 days trying to sort it out and came across another thread which says graphix driver could be a problem The native board graphics driver didnt display correctly as I could only get 640x320 or something similar so I got another agp graphics card from fleabay a ati radeon 9600 but that too will not dispaly correctly. I have since found out that ati are BAD for support. I have download a driver file but not sure how or where to unpack it! I am not that good at the terminal lol. incidentaly my laptap is also old but it has a radeon card in and no problems. I have now come to a stop as I am just going round in circles I am typiing this on my laptop as I cant even use the desktop for typing as it takes ages for the letters to appear when I am typing. like I mentioned before I want to use linux but windows is giving me no problems at all ( apart from spying, logging, keystrokes etc lol) if anyone can help it would be appreciated. incidentally the drive with linux on is around 50gb so it shouldn't be that Any help would be appreciated to stop this silver surfer from reaching for a happy pill!
Cheers Paul

12
Ubuntu / Re: newbie trying to get to grips with linux mint
« on: January 06, 2017, 05:36:41 pm »
Hi Mark
Yes I had thought of that in fact they are cheaper than a standard dell replacement..................and a lot less hassle lol

13
Ubuntu / Re: newbie trying to get to grips with linux mint
« on: January 04, 2017, 04:23:01 pm »
Hi Mark
Well, my other halfs previous computer was a dell 1755 studio. It was REALLY easy to get to the cpu, fan etc. took the back off this 1555 and whoah not so easy looks like I have got to take the whole machine apart to get at the dvd. SO I "maybe some time" or If I lose my bottle I will have to live without the dvd and use usb , Thanks for all your input and in the words of Arnie  "  i'll ' be back "
Cheers for now
Paul

14
Ubuntu / Re: newbie trying to get to grips with linux mint
« on: January 03, 2017, 05:31:01 pm »
Hi Mark
well I inserted a dvd(shop brought) and then did the commands you mentioned . The nemo mnt command didn't  produce an error message but didn't produce a read out either. I understand if you want to call it a day , no problem . its just a very strange situation. OH the laptop is 2009 dellstudio 1555 the dvd is a slot type it just takes the dvd in without a tray popping out . I might even look at replacing it if I can get at it and see if thats the problem. In the meantime I will keep delving lol
cheers
Paul



sudo mount /dev/sr0 /mnt
[sudo] password for pauly:
mount: no medium found on /dev/sr0
pauly@pauly-Studio-1555 ~ $ nemo /mnt
pauly@pauly-Studio-1555 ~ $

15
Ubuntu / Re: newbie trying to get to grips with linux mint
« on: December 31, 2016, 08:30:20 pm »
Hi Mark, SORRY I thought that was a space bar ! lol. I have yet a lot to learn . Ok redone it and this time the readout is pretty big:
21530.834738] cfg80211:  DFS Master region: unset
[21530.834740] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[21530.834743] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[21530.834746] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[21530.834748] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[21530.834751] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[21530.834754] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[21530.834757] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[21530.834759] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[21530.834761] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[21546.295750] wlp4s0: authenticate with 00:11:50:eb:9c:32
[21546.299946] wlp4s0: send auth to 00:11:50:eb:9c:32 (try 1/3)
[21546.316777] wlp4s0: authenticated
[21546.317017] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT due to WEP/TKIP use
[21546.317021] iwlwifi 0000:04:00.0 wlp4s0: disabling HT as WMM/QoS is not supported by the AP
[21546.317024] iwlwifi 0000:04:00.0 wlp4s0: disabling VHT as WMM/QoS is not supported by the AP
[21546.317028] wlp4s0: waiting for beacon from 00:11:50:eb:9c:32
[21549.702555] wlp4s0: authenticate with 00:11:50:eb:9c:32
[21549.706209] wlp4s0: send auth to 00:11:50:eb:9c:32 (try 1/3)
[21549.811840] wlp4s0: authenticated
[21549.812258] iwlwifi 0000:04:00.0 wlp4s0: disabling HT/VHT due to WEP/TKIP use
[21549.812267] iwlwifi 0000:04:00.0 wlp4s0: disabling HT as WMM/QoS is not supported by the AP
[21549.812272] iwlwifi 0000:04:00.0 wlp4s0: disabling VHT as WMM/QoS is not supported by the AP
[21549.816052] wlp4s0: associate with 00:11:50:eb:9c:32 (try 1/3)
[21549.821238] wlp4s0: RX AssocResp from 00:11:50:eb:9c:32 (capab=0x411 status=0 aid=1)
[21549.823975] wlp4s0: associated
[21570.356032] [UFW BLOCK] IN=wlp4s0 OUT= MAC=01:00:5e:00:00:01:44:e9:dd:a3:e3:30:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[21693.413657] [UFW BLOCK] IN=wlp4s0 OUT= MAC=01:00:5e:00:00:01:44:e9:dd:a3:e3:30:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[21935.720425] [UFW BLOCK] IN=wlp4s0 OUT= MAC=00:22:fb:97:dd:10:44:e9:dd:a3:e3:30:08:00 SRC=104.16.215.67 DST=192.168.1.6 LEN=40 TOS=0x00 PREC=0x00 TTL=58 ID=1350 DF PROTO=TCP SPT=443 DPT=52414 WINDOW=0 RES=0x00 RST URGP=0
[21935.720497] [UFW BLOCK] IN=wlp4s0 OUT= MAC=00:22:fb:97:dd:10:44:e9:dd:a3:e3:30:08:00 SRC=104.16.215.67 DST=192.168.1.6 LEN=40 TOS=0x00 PREC=0x00 TTL=58 ID=1351 DF PROTO=TCP SPT=443 DPT=52414 WINDOW=0 RES=0x00 RST URGP=0
[21936.052749] [UFW BLOCK] IN=wlp4s0 OUT= MAC=00:22:fb:97:dd:10:44:e9:dd:a3:e3:30:08:00 SRC=104.16.215.67 DST=192.168.1.6 LEN=40 TOS=0x00 PREC=0x00 TTL=58 ID=1397 DF PROTO=TCP SPT=443 DPT=52414 WINDOW=0 RES=0x00 RST URGP=0
[22069.102302] [UFW BLOCK] IN=wlp4s0 OUT= MAC=01:00:5e:00:00:01:44:e9:dd:a3:e3:30:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[22191.668345] [UFW BLOCK] IN=wlp4s0 OUT= MAC=01:00:5e:00:00:01:44:e9:dd:a3:e3:30:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[22316.562697] [UFW BLOCK] IN=wlp4s0 OUT= MAC=01:00:5e:00:00:01:44:e9:dd:a3:e3:30:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[22441.407436] [UFW BLOCK] IN=wlp4s0 OUT= MAC=01:00:5e:00:00:01:44:e9:dd:a3:e3:30:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[22566.666998] [UFW BLOCK] IN=wlp4s0 OUT= MAC=01:00:5e:00:00:01:44:e9:dd:a3:e3:30:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[22691.032281] [UFW BLOCK] IN=wlp4s0 OUT= MAC=01:00:5e:00:00:01:44:e9:dd:a3:e3:30:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[22816.790560] [UFW BLOCK] IN=wlp4s0 OUT= MAC=01:00:5e:00:00:01:44:e9:dd:a3:e3:30:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[22940.959020] [UFW BLOCK] IN=wlp4s0 OUT= MAC=01:00:5e:00:00:01:44:e9:dd:a3:e3:30:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[23065.860196] [UFW BLOCK] IN=wlp4s0 OUT= MAC=01:00:5e:00:00:01:44:e9:dd:a3:e3:30:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[23190.595325] [UFW BLOCK] IN=wlp4s0 OUT= MAC=01:00:5e:00:00:01:44:e9:dd:a3:e3:30:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[23315.551943] [UFW BLOCK] IN=wlp4s0 OUT= MAC=01:00:5e:00:00:01:44:e9:dd:a3:e3:30:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[23440.401393] [UFW BLOCK] IN=wlp4s0 OUT= MAC=01:00:5e:00:00:01:44:e9:dd:a3:e3:30:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[23565.310400] [UFW BLOCK] IN=wlp4s0 OUT= MAC=01:00:5e:00:00:01:44:e9:dd:a3:e3:30:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[23690.180610] [UFW BLOCK] IN=wlp4s0 OUT= MAC=01:00:5e:00:00:01:44:e9:dd:a3:e3:30:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[23815.265587] [UFW BLOCK] IN=wlp4s0 OUT= MAC=01:00:5e:00:00:01:44:e9:dd:a3:e3:30:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[23939.947494] [UFW BLOCK] IN=wlp4s0 OUT= MAC=01:00:5e:00:00:01:44:e9:dd:a3:e3:30:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[24066.257986] [UFW BLOCK] IN=wlp4s0 OUT= MAC=01:00:5e:00:00:01:44:e9:dd:a3:e3:30:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[24190.555555] [UFW BLOCK] IN=wlp4s0 OUT= MAC=01:00:5e:00:00:01:44:e9:dd:a3:e3:30:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
[24315.060615] [UFW BLOCK] IN=wlp4s0 OUT= MAC=01:00:5e:00:00:01:44:e9:dd:a3:e3:30:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2
and here is the mount command again
 mount
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=2047200k,nr_inodes=204590,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=413420k,mode=755)
/dev/sda5 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (rw,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event,release_agent=/run/cgmanager/agents/cgm-release-agent.perf_event)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb,release_agent=/run/cgmanager/agents/cgm-release-agent.hugetlb)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset,clone_children)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids,release_agent=/run/cgmanager/agents/cgm-release-agent.pids)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=31,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
cgmfs on /run/cgmanager/fs type tmpfs (rw,relatime,size=100k,mode=755)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=413420k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
pauly@pauly-Studio-1555 ~ $
Yes I have a shop dvd I can try ok inserted the dvd , its trying to read it but just not making it hope that makes sense, The mount command I have posted is before I inserted the dvd sorry I forgot the wait a few seconds bit anway it ran but now if I try mount nothing happens at all it just refresh to the $ to enter another command
hope I haven't messed up for you

Pages: [1] 2

SimplePortal 2.3.3 © 2008-2010, SimplePortal