Show Posts

You can view here all posts made by this member. Note that you can only see posts made in areas to which you currently have access.


Messages - Tramlink

Pages: 1 ... 61 62 [63]
931
General Help & Advice / Re: Networking with Windows PC's
« on: April 20, 2011, 05:48:14 pm »
OK will let you know if still having a problem after the Bank holiday weekend.

Thanks for your help.

932
General Help & Advice / Re: Networking with Windows PC's
« on: April 20, 2011, 04:00:37 pm »
Hi, thanks for tips.  Work Group is as listed this is the workgroup name of my router all the Windows boxes have the same workgroup.

Did as you requested here is the new readout-

38:    workgroup = 000D0B6DA3C4

41:    server string = %h server

52:    dns proxy = no

78:    log file = /var/log/samba/log.%m

81:    max log size = 1000

90:    syslog = 0

93:    panic action = /usr/share/samba/panic-action %d

106:    encrypt passwords = true

110:    passdb backend = tdbsam

112:    obey pam restrictions = yes

117:    unix password sync = yes

122:    passwd program = /usr/bin/passwd %u

123:    passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

128:    pam password change = yes

236:    wins support = no

238:    comment = Home Directories

239:    browseable = no

247:    create mask = 0700

251:    directory mask = 0700

258:    valid users = %S

282:    comment = All Printers

283:    browseable = no

284:    path = /var/spool/samba

285:    printable = yes

286:    guest ok = no

288:    create mask = 0700

293:    comment = Printer Drivers

294:    path = /var/lib/samba/printers

295:    browseable = yes

297:    guest ok = no

331:    path = /home/allusers

332:    available = yes

333:    browsable = yes

334:    public = yes

338:    path = /home/allusers/Music

339:    available = yes

340:    browsable = yes

341:    public = yes

933
General Help & Advice / Re: Networking with Windows PC's
« on: April 20, 2011, 11:49:31 am »
I am still having problems with networking (why do PCs have so many issues).

The windows PCs can not see the Linux PC again.  How do you configure SAMBA from a Terminal window?

When I click on my Samba link I get a warning message " some lines couldn't be understood while reading the configuration file  /etc/samba/smb.conf. These maybe unknown configuration directives for samba plugins but could also be  configuration errors"


 here is the read out -

38:    workgroup = 000D0B6DA3C4

41:    server string = %h server

52:    dns proxy = no

78:    log file = /var/log/samba/log.%m

81:    max log size = 1000

90:    syslog = 0

93:    panic action = /usr/share/samba/panic-action %d

106:    encrypt passwords = true

110:    passdb backend = tdbsam

112:    obey pam restrictions = yes

117:    unix password sync = yes

122:    passwd program = /usr/bin/passwd %u

123:    passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

128:    pam password change = yes

236:    wins support = yes

238:    comment = Home Directories

239:    browseable = no

247:    create mask = 0700

251:    directory mask = 0700

258:    valid users = %S

282:    comment = All Printers

283:    browseable = no

284:    path = /var/spool/samba

285:    printable = yes

286:    guest ok = no

288:    create mask = 0700

293:    comment = Printer Drivers

294:    path = /var/lib/samba/printers

295:    browseable = yes

297:    guest ok = no

331:    path = /home/allusers

332:    available = yes

333:    browsable = yes

334:    public = yes

338:    path = /home/allusers/Music

339:    available = yes

340:    browsable = yes

341:    public = yes

934
General Help & Advice / Re: Networking with Windows PC's
« on: April 19, 2011, 03:49:35 pm »
Thanks for the information. Have installed SAMBA and sheared folders, changed WORKGROUP to that of my network.   The Linux PC can now be seen by the Windows PCs (all well and good) when I try to access the Linux system it asks for a username and password.

I am typing in the username that I log in with and the system email (this is rejected) is there anyway to prevent the request for a password?

Regards.

935
General Help & Advice / Re: Networking with Windows PC's
« on: April 18, 2011, 10:29:19 pm »
Hi,  The Linux PC can see the windows based PCs on the network and also access the sheared folders, documents, mp3 files.

However, the Windows based PCs do not see the Linux machine and so can not share the sheared folders.

If the Putty package is part of the packages available on my Linux PC then I would expect it should be installed on Linux.

No mention of installing anything on the Windows PCs.

Regards.

936
General Help & Advice / Networking with Windows PC's
« on: April 18, 2011, 05:41:38 pm »
Dear All,

Have read about a program called putty is this the best option for getting my windows based PCs to see Linux?

It is listed in my Peppermint Linux as a package so should be easy to install.

Dose anyone know if it is easy to use and set up.

Thanks in advance.

937
Internet Connectivity / Re: PCMCIA wireless card
« on: April 16, 2011, 03:28:10 pm »
The instructions worked like a dream.

Thanks for your help.

938
Internet Connectivity / Re: PCMCIA wireless card
« on: April 15, 2011, 05:43:12 pm »
allusers@smalllaptop ~ $ lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
00:03.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 0c)
00:03.1 Serial controller: Agere Systems LT WinModem (rev 01)
00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
01:00.0 VGA compatible controller: S3 Inc. 86C270-294 Savage/IX-MV (rev 13)
06:00.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless Interface
allusers@smalllaptop ~ $

allusers@smalllaptop ~ $ sudo lshw -C network
  *-network               
       description: Ethernet interface
       product: 82557/8/9/0/1 Ethernet Pro 100
       vendor: Intel Corporation
       physical id: 3
       bus info: pci@0000:00:03.0
       logical name: eth0
       version: 0c
       serial: 00:03:47:93:68:02
       size: 100MB/s
       capacity: 100MB/s
       width: 32 bits
       clock: 33MHz
       capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=full firmware=N/A ip=192.168.11.4 latency=66 link=yes maxlatency=56 mingnt=8 multicast=yes port=MII speed=100MB/s
       resources: irq:11 memory:e8120000-e8120fff ioport:1800(size=64) memory:e8100000-e811ffff memory:30100000-3010ffff
  *-network UNCLAIMED
       description: Network controller
       product: ACX 111 54Mbps Wireless Interface
       vendor: Texas Instruments
       physical id: 1
       bus info: pci@0000:06:00.0
       version: 00
       width: 32 bits
       clock: 33MHz
       capabilities: pm cap_list
       configuration: latency=0
       resources: memory:2c020000-2c021fff memory:2c000000-2c01ffff
allusers@smalllaptop ~ $

Information that you asked for, Thanks.

939
Internet Connectivity / PCMCIA wireless card
« on: April 15, 2011, 05:18:25 pm »
Dear All,

I am up and running with Peppermint-One and connection via cable is fine.

However I also need to connect via wi-fi home network.  How do I get the system to see my PCMCIA Card and then download the drivers for the PEAK card.

Thanks in advance.

940
General Discussion / Re: Not Impressed so Far
« on: April 15, 2011, 04:53:16 pm »
Thanks for all your help on this subject.

Peppermint seems to be a good option for me, getting to grips with it after only 30 mins.

941
General Discussion / Re: Not Impressed so Far
« on: April 15, 2011, 08:40:30 am »
Hi,

Passed memory test OK but disk test failed with same report -
(initramfs) mount: mounting /dev/loop0 on //filesystem,squashfs failed: input/output error
Can not mount /dev/loop0 (/cdrom/casper/filesystem,squashfs) on //filesystem.squashfs

I tried the CD on a P4 laptop with the same problem so would seem to be a problem with the burning or the image file.

However I have managed to load a Linux  version called Peppermint-One so will take a look at this.

So it is strange that there is no problem with this version yet I have had loading problems with 8 other iso image files.  I can not believe that all these files are corrupt or failed to burn even at 4x speed.

Will let you know how I get on with Peppermint-One.

Will also try putting one of the image files on to a USB stick.

Thanks for your help so far.

942
General Discussion / Re: Not Impressed so Far
« on: April 13, 2011, 05:57:10 pm »
Have also tried what you sad with Ubuntu 10.10 and it failed with the following report:

BusyBox v1.15.3 (Ubuntu 1:1.15.3-lubuntu5) built-in shell (ash)
Enter 'help' for a list of built-in commands.

(initramfs) mount: mounting /dev/loop0 on //filesystem,squashfs failed: input/output error
Can not mount /dev/loop0 (/cdrom/casper/filesystem,squashfs) on //filesystem.squashfs

Open to suggestions.

Thanks.

943
General Discussion / Re: Not Impressed so Far
« on: April 13, 2011, 05:33:30 pm »
Hi, the answers to the readout questions are below:

uname -a

Linux Small 2.6.30.6-slitaz #1 SMP Sun Mar 28 16:39:51 CEST 2010 i686 unknown

Xorg -version

X.Org X Server 1.5.2
Release Date 10 October 2008
X Protococol version 11, Revision 0
Build Operating System SliTaz GNU/Linux
Current Operating System:  Linux Small 2.6.30 #1 SMP Sun Mar 28 16:39:51 CEST 2010 i686
Build Date: 02 March 2010 02:38:08AM

lsmod

Module               size       used by
snd_cs46xx            70540      1
gameport             9348      2 snd_cs46xx
snd_rawmidi            16920      1 snd_cs46xx
snd_seq_device              5544      1 snd_rawmidi
snd_ac97_codec         88736      1 snd_cs46xx
ac97_bus              1308      1 snd_ac97_codec
snd_pcm            51780      2 snd_cs46xx, snd_ac97_codec
snd_timer            16344      1 snd_pcm
snd               43584      8 snd_cs46xx, snd_rawmidi,snd_seq_device, snd_ac97_codec, snd_pcm, snd_timer
soundcore              5180      1 snd
snd_page_alloc              7256      2 snd_cs46xx, snd_pcm
yenta_socket            20988      0
rsrc_nonstatic              9136      1 yenta_socket
pcmcia_core            27628      2 yenta_socket, rsrc_nonstatic

Will also try the other things you suggested.

Many Thanks.

944
General Discussion / Re: Not Impressed so Far
« on: April 12, 2011, 10:49:11 pm »
Hi, Thanks for your reply, Laptop is an IBM Thinkpad T22 P3 with 500MB of Ram (max for this machine).

It came with Windows 98 but has been running windows XP Home for 3years now with no problems.

I have installed SliTaz on the computer on 2 partitions. This is the only operating system on the computer as windows XP has been completely removed and a Linux file system installed.

Here is a list of the distros I have tried:
VL5.8-std-LIVE.iso
ubuntu-10.10-desktop-i386.iso
slitaz-3.0.iso (installed and working)
pclinuxos-lxde-mini-2010.12.iso
lunar-1.6.5-i686.iso
Fedora-14-i686-Live-Desktop.iso
enlisy-07.1-live.iso
DL3.5_20092802.iso

Some get to an installation or multi-choice screen

Others start to install Linux

All find some reason to stop the installation, I have downloaded each one from different down load mirrors and used two different CD burning programs.

All to no avail, have not given up but if I am having this much trouble then people who want it working out of the box could be discouraged.

945
General Discussion / Not Impressed so Far
« on: April 12, 2011, 05:25:36 pm »
Well I had heard good things about Linux, so thought I would try it out using my oldest Computer an IBM P3 laptop with 500MB of Ram ( Runs XP home OK).

So Far I am not impressed, I have downloaded 12 different versions of Linux and only found one that works on my computer (SliTaz V.3.0) and this release is the pits.  It is not even possible to change the screen resolution from the desk-top and it looks like I will have problems when I want to use my PEAK PCMCIA Wi-fi card.

If Linux wants to take on Windows (Please Please Please) it needs to get much more focused on the end user and make installation easy for those who do not even know what a Command Line Prompt is.

I build my own PC's so I have some understanding of how a computer works.  If you think you know a version of Linux that will get me hooked then please let me know.  :'(


Pages: 1 ... 61 62 [63]

SimplePortal 2.3.3 © 2008-2010, SimplePortal