Author Topic: pinnacle pctv hybrid pro stick + ubuntu 12.4.1  (Read 7243 times)

0 Members and 1 Guest are viewing this topic.

Offline Behrooz

  • Jr. Member
  • **
  • Posts: 5
  • Karma: 0
  • I've just joined!
    • View Profile
    • Awards
pinnacle pctv hybrid pro stick + ubuntu 12.4.1
« on: September 18, 2012, 09:03:56 pm »
Hello everyone
At first sorry if there isn't good place for this topic and sorry for my English .
I have a Dvb-T , to see it
http://www.pcadvisor.co.uk/reviews/pc-peripheral/103939/pinnacle-pctv-hybrid-pro-stick-review/#zzz
as you see pinnacle pctv hybrid pro stick .
i have Ubuntu 12.4.1 64bit and use kernel
Code: [Select]
3.2.0-30-generic #48-Ubuntu  x86_64 x86_64 x86_64 GNU/Linux
i search in Internet for installation guide unit see this link
http://linuxforums.org.uk/index.php?topic=5682.0
i start according to this guide but when run this command
http://kernellabs.com/hg/~dheitmueller/v4l-dvb-drxd]sudo hg clone [url]http://kernellabs.com/hg/~dheitmueller/v4l-dvb-drxd[/url]
after 2 or 3 min see this output
Code: [Select]
behi@behi-EP41-UD3L:/usr/src$ hg clone http://kernellabs.com/hg/~dheitmueller/v4l-dvb-drxd
abort: error: Connection reset by peer
now my question is where i can download v4l-dvb-drxd ?
before seen this guide i do something for install dvb-t but i can't do it .
i put output command tail -f /var/log/syslog
Code: [Select]
behi@behi-EP41-UD3L:~$ ‫‪tail -f /var/log/syslog
Sep 19 00:03:04 behi-EP41-UD3L ntpd[3392]: Listen normally on 4 eth0 fe80::224:1dff:fed0:94c5 UDP 123
Sep 19 00:03:04 behi-EP41-UD3L ntpd[3392]: Listen normally on 5 lo ::1 UDP 123
Sep 19 00:03:04 behi-EP41-UD3L ntpd[3392]: peers refreshed
Sep 19 00:03:04 behi-EP41-UD3L ntpd[3392]: Listening on routing socket on fd #22 for interface updates
Sep 19 00:17:01 behi-EP41-UD3L CRON[3445]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Sep 19 00:22:19 behi-EP41-UD3L kernel: [ 3802.029132] usb 1-8: USB disconnect, device number 5
Sep 19 00:22:19 behi-EP41-UD3L kernel: [ 3802.029241] em28xx #0: disconnecting em28xx #0 video
Sep 19 00:22:19 behi-EP41-UD3L kernel: [ 3802.029248] em28xx #0: V4L2 device vbi1 deregistered
Sep 19 00:22:19 behi-EP41-UD3L kernel: [ 3802.029350] em28xx #0: V4L2 device video1 deregistered
Sep 19 00:22:19 behi-EP41-UD3L kernel: [ 3802.029883] xc2028 0-0061: destroying instance
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.552030] usb 1-8: new high-speed USB device number 6 using ehci_hcd
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.687557] em28xx: New device  USB 2881 Video @ 480 Mbps (eb1a:2881, interface 0, class 0)
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.687563] em28xx: Video interface 0 found
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.687566] em28xx: DVB interface 0 found
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.687715] em28xx #0: chip ID is em2882/em2883
Sep 19 00:22:37 behi-EP41-UD3L mtp-probe: checking bus 1, device 6: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-8"
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.770966] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.770984] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.771000] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.771016] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.771031] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.771046] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.771062] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.771077] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.771093] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.771108] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.771123] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.771139] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.771154] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.771170] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.771185] em28xx #0: i2c eeprom e0: 5a 00 55 aa 79 55 54 03 00 17 98 01 00 00 00 00
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.771200] em28xx #0: i2c eeprom f0: 0c 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.771218] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xb8846b20
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.771221] em28xx #0: EEPROM info:
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.771224] em28xx #0: AC97 audio (5 sample rates)
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.771227] em28xx #0: USB Remote wakeup capable
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.771229] em28xx #0: 500mA max power
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.771233] em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.816466] em28xx #0: Your board has no unique USB ID.
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.816473] em28xx #0: A hint were successfully done, based on eeprom hash.
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.816477] em28xx #0: This method is not 100% failproof.
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.816480] em28xx #0: If the board were missdetected, please email this log to:
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.816484] em28xx #0: V4L Mailing List  <linux-media@vger.kernel.org>
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.816487] em28xx #0: Board detected as Pinnacle Hybrid Pro
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3820.948019] em28xx #0: Identified as Pinnacle Hybrid Pro (card=53)
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3821.016461] tvp5150 0-005c: chip found @ 0xb8 (em28xx #0)
Sep 19 00:22:37 behi-EP41-UD3L kernel: [ 3821.016467] tvp5150 0-005c: tvp5150am1 detected.
Sep 19 00:22:38 behi-EP41-UD3L kernel: [ 3821.037042] tuner 0-0061: Tuner -1 found with type(s) Radio TV.
Sep 19 00:22:38 behi-EP41-UD3L kernel: [ 3821.037066] xc2028 0-0061: creating new instance
Sep 19 00:22:38 behi-EP41-UD3L kernel: [ 3821.037070] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
Sep 19 00:22:38 behi-EP41-UD3L kernel: [ 3821.038000] em28xx #0: Config register raw data: 0x58
Sep 19 00:22:38 behi-EP41-UD3L kernel: [ 3821.039327] em28xx #0: AC97 vendor ID = 0x83847652
Sep 19 00:22:38 behi-EP41-UD3L kernel: [ 3821.039826] em28xx #0: AC97 features = 0x6a90
Sep 19 00:22:38 behi-EP41-UD3L kernel: [ 3821.039831] em28xx #0: Sigmatel audio processor detected(stac 9752)
Sep 19 00:22:38 behi-EP41-UD3L kernel: [ 3821.043309] xc2028 0-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
Sep 19 00:22:38 behi-EP41-UD3L kernel: [ 3821.212949] em28xx #0: v4l2 driver version 0.1.3
Sep 19 00:22:38 behi-EP41-UD3L kernel: [ 3821.260024] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
Sep 19 00:22:39 behi-EP41-UD3L kernel: [ 3822.279534] (0), id 00000000000000ff:
Sep 19 00:22:39 behi-EP41-UD3L kernel: [ 3822.279541] xc2028 0-0061: Loading firmware for type=(0), id 0000000100000007.
Sep 19 00:22:39 behi-EP41-UD3L kernel: [ 3822.300531] SCODE (20000000), id 0000000100000007:
Sep 19 00:22:39 behi-EP41-UD3L kernel: [ 3822.300541] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000800000007.
Sep 19 00:22:39 behi-EP41-UD3L kernel: [ 3822.495532] em28xx #0: V4L2 video device registered as video1
Sep 19 00:22:39 behi-EP41-UD3L kernel: [ 3822.495537] em28xx #0: V4L2 VBI device registered as vbi1
Sep 19 00:22:39 behi-EP41-UD3L kernel: [ 3822.636776] xc2028 0-0061: attaching existing instance
Sep 19 00:22:39 behi-EP41-UD3L kernel: [ 3822.636782] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
Sep 19 00:22:39 behi-EP41-UD3L kernel: [ 3822.636786] em28xx #0: em28xx #0/2: xc3028 attached
Sep 19 00:22:39 behi-EP41-UD3L kernel: [ 3822.636790] DVB: registering new adapter (em28xx #0)
Sep 19 00:22:39 behi-EP41-UD3L kernel: [ 3822.636797] usb 1-8: DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
Sep 19 00:22:39 behi-EP41-UD3L kernel: [ 3822.637376] em28xx #0: Successfully loaded em28xx-dvb
Sep 19 00:22:39 behi-EP41-UD3L kernel: [ 3822.637462] em28xx audio device (eb1a:2881): interface 1, class 1
Sep 19 00:22:39 behi-EP41-UD3L mtp-probe: bus: 1, device: 6 was not an MTP device
Sep 19 00:22:39 behi-EP41-UD3L pulseaudio[2286]: [pulseaudio] alsa-mixer.c: Your kernel driver is broken: it reports a volume range from 0 to 0 which makes no sense.
Sep 19 00:22:39  pulseaudio[2286]: last message repeated 10 times
Sep 19 00:22:39 behi-EP41-UD3L rtkit-daemon[2014]: Successfully made thread 3518 of process 2286 (n/a) owned by '1000' RT at priority 5.
Sep 19 00:22:39 behi-EP41-UD3L rtkit-daemon[2014]: Supervising 5 threads of 1 processes of 1 users.

you can see log . i think dvb-t is install nice and i can use it but i can't receive any signal .  :'( :'( :'( :'( :'( :'( :'(
look this
Code: [Select]
behi@behi-EP41-UD3L:~$ w_scan -a 0
w_scan version 20111203 (compiled for DVB API 5.4)
WARNING: could not guess your country. Falling back to 'DE'
guessing country 'DE', use -c <country> to override
using settings for GERMANY
DVB aerial
DVB-T Europe
frontend_type DVB-T, channellist 4
output format vdr-1.6
WARNING: could not guess your codepage. Falling back to 'UTF-8'
output charset 'UTF-8', use -C <charset> to override
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.7
frontend 'Zarlink ZL10353 DVB-T' supports
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
FREQ (174.00MHz ... 862.00MHz)
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
Scanning 7MHz frequencies...
177500: (time: 00:00)
184500: (time: 00:03)
191500: (time: 00:05)
198500: (time: 00:08)
205500: (time: 00:11)
212500: (time: 00:14)
219500: (time: 00:16)
226500: (time: 00:19)
Scanning 8MHz frequencies...
474000: (time: 00:22)
482000: (time: 00:24)
490000: (time: 00:27)
498000: (time: 00:30)
506000: (time: 00:32)
514000: (time: 00:35)
522000: (time: 00:38)
530000: (time: 00:41)
538000: (time: 00:43)
546000: (time: 00:46)
554000: (time: 00:49)
562000: (time: 00:51)
570000: (time: 00:54)
578000: (time: 00:57)
586000: (time: 00:59)
594000: (time: 01:02)
602000: (time: 01:05)
610000: (time: 01:08)
618000: (time: 01:10)
626000: (time: 01:13)
634000: (time: 01:16)
642000: (time: 01:18)
650000: (time: 01:21)
658000: (time: 01:24)
666000: (time: 01:26)
674000: (time: 01:29)
682000: (time: 01:32)
690000: (time: 01:34)
698000: (time: 01:37)
706000: (time: 01:40)
714000: (time: 01:43)
722000: (time: 01:45)
730000: (time: 01:48)
738000: (time: 01:51)
746000: (time: 01:53)
754000: (time: 01:56)
762000: (time: 01:59)
770000: (time: 02:01)
778000: (time: 02:04)
786000: (time: 02:07)
794000: (time: 02:10)
802000: (time: 02:12)
810000: (time: 02:15)
818000: (time: 02:18)
826000: (time: 02:20)
834000: (time: 02:23)
842000: (time: 02:26)
850000: (time: 02:28)
858000: (time: 02:31)

ERROR: Sorry - i couldn't get any working frequency/transponder
 Nothing to scan!!

Thank you .

Offline Mark Greaves (PCNetSpec)

  • Administrator
  • Hero Member
  • *****
  • Posts: 18176
  • Karma: 476
  • Gender: Male
  • "-rw-rw-rw-" .. The Number Of The Beast
    • View Profile
    • PCNetSpec
    • Awards
Re: pinnacle pctv hybrid pro stick + ubuntu 12.4.1
« Reply #1 on: September 19, 2012, 11:49:30 am »
If you're in Iran, try using the "IR" country code in your scan (I'm assuming Iran uses DVD-t):
Code: [Select]
w_scan -ft -c IR



w_scan manpage here:
http://manpages.ubuntu.com/manpages//lucid/man1/w_scan.1.html

and country codes gleaned from this file:
http://read.pudn.com/downloads172/sourcecode/unix_linux/799719/w_scan/countries.c__.htm
or running:
Code: [Select]
w_scan -c?
should list the 2 letter country codes
« Last Edit: September 19, 2012, 11:51:42 am by Mark Greaves (PCNetSpec) »
WARNING: You are logged into reality as 'root'
logging in as 'insane' is the only safe option.
pcnetspec.co.uk

Offline Behrooz

  • Jr. Member
  • **
  • Posts: 5
  • Karma: 0
  • I've just joined!
    • View Profile
    • Awards
Re: pinnacle pctv hybrid pro stick + ubuntu 12.4.1
« Reply #2 on: September 19, 2012, 12:10:54 pm »
Hello
I try your command
Code: [Select]
w_scan -ft -c IR
and output
Code: [Select]
behi@behi-EP41-UD3L:~$ w_scan -ft -c IR
w_scan version 20120605 (compiled for DVB API 5.4)
using settings for IRAN, ISLAMIC REPUBLIC OF
Country identifier IR not defined. Using defaults.
scan type TERRESTRIAL, channellist 4
output format vdr-1.6
WARNING: could not guess your codepage. Falling back to 'UTF-8'
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 -> TERRESTRIAL "Zarlink ZL10353 DVB-T": good :-)
Using TERRESTRIAL frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.7
frontend 'Zarlink ZL10353 DVB-T' supports
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
FREQ (174.00MHz ... 862.00MHz)
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
Scanning 7MHz frequencies...
177500: (time: 00:00)
184500: (time: 00:03)
191500: (time: 00:05)
198500: (time: 00:08)
205500: (time: 00:11)
212500: (time: 00:13)
219500: (time: 00:16)
226500: (time: 00:19)
Scanning 8MHz frequencies...
474000: (time: 00:22)
482000: (time: 00:24)
490000: (time: 00:27)
498000: (time: 00:30)
506000: (time: 00:32)
514000: (time: 00:35)
522000: (time: 00:38)
530000: (time: 00:40)
538000: (time: 00:43)
546000: (time: 00:46)
554000: (time: 00:49)
562000: (time: 00:51)
570000: (time: 00:54)
578000: (time: 00:57)
586000: (time: 00:59)
594000: (time: 01:02)
602000: (time: 01:05)
610000: (time: 01:07)
618000: (time: 01:10) (time: 01:11) signal ok:
QAM_AUTO f = 618000 kHz I999B8C999D999T999G999Y999
Info: no data from NIT(actual)
626000: (time: 01:25)
634000: (time: 01:28)
642000: (time: 01:30)
650000: (time: 01:33)
658000: (time: 01:36)
666000: (time: 01:38)
674000: (time: 01:41)
682000: (time: 01:44)
690000: (time: 01:47)
698000: (time: 01:49)
706000: (time: 01:52)
714000: (time: 01:55)
722000: (time: 01:57)
730000: (time: 02:00)
738000: (time: 02:03)
746000: (time: 02:05)
754000: (time: 02:08)
762000: (time: 02:11)
770000: (time: 02:13)
778000: (time: 02:16)
786000: (time: 02:19)
794000: (time: 02:22)
802000: (time: 02:24)
810000: (time: 02:27)
818000: (time: 02:30)
826000: (time: 02:32)
834000: (time: 02:35)
842000: (time: 02:38)
850000: (time: 02:40)
858000: (time: 02:43)
tune to: QAM_AUTO f = 618000 kHz I999B8C999D999T999G999Y999
(time: 02:46) ----------no signal----------
tune to: QAM_AUTO f = 618000 kHz I999B8C999D999T999G999Y999  (no signal)
(time: 02:47) ----------no signal----------

ERROR: Sorry - i couldn't get any working frequency/transponder

I try another application was scat . i create text file and put in this line
Code: [Select]
T 618000000 8MHz AUTO AUTO AUTO AUTO AUTO AUTO 

and save it
now i run this command
Code: [Select]
scan t > channels.conf
Code: [Select]
behi@behi-EP41-UD3L:~/dvb-test$ scan t > channels.conf
scanning t
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 618000000 0 9 9 6 2 4 4
>>> tune to: 618000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_AUTO
0x0000 0x0065: pmt_pid 0x0065 IRIB -- IRIB-TV1 (running)
0x0000 0x0066: pmt_pid 0x0066 IRIB -- IRIB-TV2 (running)
0x0000 0x0067: pmt_pid 0x0067 IRIB -- IRIB-TV3 (running)
0x0000 0x0068: pmt_pid 0x0068 IRIB -- IRIB-TV4 (running)
0x0000 0x0069: pmt_pid 0x0069 IRIB -- IRIB-TV5 (running)
0x0000 0x006a: pmt_pid 0x006a IRIB -- IRINN (running)
0x0000 0x006b: pmt_pid 0x006b IRIB -- IRIB AMOOZESH (running)
0x0000 0x006c: pmt_pid 0x006c IRIB -- IRIB QURAN (running)
0x0000 0x0097: pmt_pid 0x0097 IRIB -- RADIO IRAN (running)
0x0000 0x0098: pmt_pid 0x0098 IRIB -- RADIO PAYAM (running)
0x0000 0x0099: pmt_pid 0x0099 IRIB -- RADIO JAVAN (running)
0x0000 0x009a: pmt_pid 0x009a IRIB -- RADIO MAAREF (running)
0x0000 0x009b: pmt_pid 0x009b IRIB -- RADIO QURAN (running)
0x0000 0x009c: pmt_pid 0x009c IRIB -- RADIO FARHANG (running)
0x0000 0x009d: pmt_pid 0x009d IRIB -- RADIO SALAMAT (running)
0x0000 0x009e: pmt_pid 0x009e IRIB -- RADIO VARZESH (running)
0x0000 0x009f: pmt_pid 0x009f IRIB -- RADIO EGHTESAD (running)
0x0000 0x00a0: pmt_pid 0x00a0 IRIB -- RADIO TEHRAN (running)
0x0000 0x00a1: pmt_pid 0x00a1 IRIB -- RADIO AVAA (running)
0x0000 0x00a2: pmt_pid 0x00a2 IRIB -- RADIO NAMAYESH (running)
0x0000 0x00a3: pmt_pid 0x00a3 IRIB -- RADIO FASLI (running)
0x0000 0x00a4: pmt_pid 0x00a4 IRIB -- RADIO CALL OF ISLAM (running)
0x0000 0x00a5: pmt_pid 0x00a5 IRIB -- RADIO SEDAYE ASHENA (running)
Network Name 'IRIB'
>>> tune to: 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 650000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
dumping lists (23 services)
Done.
you can see it work . now my question is why w-scan can't find any channel . next question how i can convert channels.conf to use in vlc
w_scan convert direct channels list for vlc but it don't work for me .
Thnak you

Offline Mark Greaves (PCNetSpec)

  • Administrator
  • Hero Member
  • *****
  • Posts: 18176
  • Karma: 476
  • Gender: Male
  • "-rw-rw-rw-" .. The Number Of The Beast
    • View Profile
    • PCNetSpec
    • Awards
Re: pinnacle pctv hybrid pro stick + ubuntu 12.4.1
« Reply #3 on: September 19, 2012, 12:29:24 pm »
Does it need converting ? .. can't you just run:
Code: [Select]
vlc channels.conf
?
« Last Edit: September 19, 2012, 12:54:21 pm by Mark Greaves (PCNetSpec) »
WARNING: You are logged into reality as 'root'
logging in as 'insane' is the only safe option.
pcnetspec.co.uk

Offline Behrooz

  • Jr. Member
  • **
  • Posts: 5
  • Karma: 0
  • I've just joined!
    • View Profile
    • Awards
Re: pinnacle pctv hybrid pro stick + ubuntu 12.4.1
« Reply #4 on: September 19, 2012, 01:14:51 pm »
At last i win  ;D ;D ;D ;D ;D
i can see channels in vlc . do you know vdr support dvb-t ?
Thanks

Offline Mark Greaves (PCNetSpec)

  • Administrator
  • Hero Member
  • *****
  • Posts: 18176
  • Karma: 476
  • Gender: Male
  • "-rw-rw-rw-" .. The Number Of The Beast
    • View Profile
    • PCNetSpec
    • Awards
Re: pinnacle pctv hybrid pro stick + ubuntu 12.4.1
« Reply #5 on: September 19, 2012, 05:24:07 pm »
I couldn't say for sure, I've never used VDR, but I can't see why not .. their wiki suggests it works with DVB (Digital Video Broadcasting) and the "T" in DVB-T just stands for "Terrestrial" (ie. not from a satellite)  :)

http://linuxtv.org/vdrwiki/index.php/Main_Page
and
http://linuxtv.org/vdrwiki/index.php/DVB_installation

You could also look at this page:
http://www.vdr-wiki.de/wiki/index.php/DVB-T
In German I'm afraid .. but there's always Google translate ;)
« Last Edit: September 19, 2012, 06:00:12 pm by Mark Greaves (PCNetSpec) »
WARNING: You are logged into reality as 'root'
logging in as 'insane' is the only safe option.
pcnetspec.co.uk

Offline Behrooz

  • Jr. Member
  • **
  • Posts: 5
  • Karma: 0
  • I've just joined!
    • View Profile
    • Awards
Re: pinnacle pctv hybrid pro stick + ubuntu 12.4.1
« Reply #6 on: September 19, 2012, 07:52:18 pm »
Hello
Which is better application for dvb-t ?
Thanks

Offline Mark Greaves (PCNetSpec)

  • Administrator
  • Hero Member
  • *****
  • Posts: 18176
  • Karma: 476
  • Gender: Male
  • "-rw-rw-rw-" .. The Number Of The Beast
    • View Profile
    • PCNetSpec
    • Awards
Re: pinnacle pctv hybrid pro stick + ubuntu 12.4.1
« Reply #7 on: September 19, 2012, 08:19:41 pm »
As far as Im aware you can record directly from VLC .. but I don't have a TV card so can't test it .. maybe this will help:
http://forum.videolan.org/viewtopic.php?f=4&t=68630

If not, check the VLC forum
WARNING: You are logged into reality as 'root'
logging in as 'insane' is the only safe option.
pcnetspec.co.uk

Offline Behrooz

  • Jr. Member
  • **
  • Posts: 5
  • Karma: 0
  • I've just joined!
    • View Profile
    • Awards
Re: pinnacle pctv hybrid pro stick + ubuntu 12.4.1
« Reply #8 on: September 19, 2012, 08:45:41 pm »
Hello i use vlc it is perfect
but i have question . My i use remote control dvb-t ( pinnacle pctv hybrid pro stick ) under linux ? if yes , how ? and it work in vlc .
Thank you

Offline Mark Greaves (PCNetSpec)

  • Administrator
  • Hero Member
  • *****
  • Posts: 18176
  • Karma: 476
  • Gender: Male
  • "-rw-rw-rw-" .. The Number Of The Beast
    • View Profile
    • PCNetSpec
    • Awards
Re: pinnacle pctv hybrid pro stick + ubuntu 12.4.1
« Reply #9 on: September 19, 2012, 09:18:23 pm »
As your card comes with an IR remote .. I think you need to be looking at "lirc" .. but I couldn't tell you how to configure it.

Some pages that may help:-

https://help.ubuntu.com/community/LIRC
and
http://wiki.xbmc.org/index.php?title=How-to:Setup_Lirc
and
https://help.ubuntu.com/community/LIRC
and
http://www.lirc.org/html/configure.html
and
http://en.gentoo-wiki.com/wiki/VLC/LIRC
and
http://lircconfig.commandir.com/

Or just google "setting up lirc" or "configuring lirc" etc.



Once you have LIRC installed/configured/working .. in VLC -

Go to Tools->Preferences
Show settings->All (bottom left)
Go to Interface>Control Interfaces
Put a tick in Infrared remote control interface
Save, close, restart VLC
« Last Edit: September 19, 2012, 09:37:47 pm by Mark Greaves (PCNetSpec) »
WARNING: You are logged into reality as 'root'
logging in as 'insane' is the only safe option.
pcnetspec.co.uk

 


SimplePortal 2.3.3 © 2008-2010, SimplePortal