install windows after peppermint

Hello:
as in the subject, can i install windows after linux? and how?
thanks

Yes you can, with a few caveats

a) Windows requires the bot files to be on a primary partition … you may not have any left
and
b) expect installing Windows to overwrite the Linux bootloader leaving you unable to boot Linux … this can be fixed post installation as long as you still have a Linux LiveCD/DVD/USB

Both the above only apply to legacy BIOS systems … theoretically, newer UEFI/GPT PC’s should be fine no matter which you install first.

Hello
so first step is??
i tried to make partition for the windows because all my 1TB is for linux, but i cant , it told me that you cant resize it

What is the output from:

sudo fdisk -l

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x355d84ee

Device Boot Start End Blocks Id System
/dev/sda1 * 2048 499711 248832 83 Linux
/dev/sda2 501758 1953523711 976510977 5 Extended
Partition 2 does not start on physical sector boundary.
/dev/sda5 501760 1953523711 976510976 8e Linux LVM

Disk /dev/mapper/peppermint–vg-root: 991.4 GB, 991395053568 bytes
255 heads, 63 sectors/track, 120530 cylinders, total 1936318464 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/peppermint–vg-root doesn’t contain a valid partition table

Disk /dev/mapper/peppermint–vg-swap_1: 8501 MB, 8501854208 bytes
255 heads, 63 sectors/track, 1033 cylinders, total 16605184 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/peppermint–vg-swap_1 doesn’t contain a valid partition table

you can do this, with some serious partition juggling … but unless you’ve done a lot of customisation in Peppermint it’d probably be easier to write-off Peppermint and reinstall it AFTER Windows.